Diamond Driller Salary
in Spain

Description: Drills minute channels in industrial diamonds for use in wire-drawing dies, using drill, lathe, and handtools: positions diamond in chuck of lathe equipped with diamond-charged wire (drilling point) or forms wax cup around diamond by hand, fills cup with diamond dust mixture, and inserts steel needle into lathe to act as drilling tool. Regulates speed of revolutions and reciprocating action of drilling mechanism. Advances cutting point of drill according to specifications covering depth and contour of channel, working to tolerance of 0.0001 inch. Examines depth and shape of channel with microscope and regrinds point of drill. Drills backout (hole drilled from opposite side of stone to meet channel) to prevent chipping surface of stone. Laps inner wall of channel by means of machine that revolves stone as rotating wire or needle rocks back and forth in channel, working to hole diameter tolerance of 0.0000018 inch. Tests accuracy of die hole by pulling specified length of wire through die and measuring its resistance in wheatstone bridge having readings translated into wire diameter or by taking a series of readings along length of wire with electronic micrometer. Secures stone in metal mounting, using molten solder. May drill cavity (spot) in face of stone to hold diamond dust mixture, by pressing pointed end of diamond chip against revolving stone, using pliers. May be designated according to operation performed as finisher, fine-diamond dies.