Welding Machine Operator Gas Metal Arc Salary in Connecticut, United States
The average pay for a Welding Machine Operator Gas Metal Arc is $42,142 a year and $20 an hour in Connecticut, United States.
The average salary range for a Welding Machine Operator Gas Metal Arc is between $31,854 and $50,632.
This compensation analysis is based on salary survey data collected directly from employers and anonymous employees in Connecticut, United States.
Average Salary Chart
Sets up and operates arc welding machine that welds together parts of fabricated metal products, as specified by blueprints, layouts, welding procedures, and operating charts: welds flat, cylindrical, or irregular parts that may be clamped, tack-welded, or otherwise positioned.
May position weld line parallel to carriage.
Turns cranks or pushes buttons to align electrode on welding head over weld joint to weld linear joints, or adjust length of radial arm to position electrode over weld joint when welding radial joints.
Clamps cylindrical workpieces onto turning rolls under stationary head to weld circular joints.
Threads specified electrode wire from reel through feed rolls and welding head.
Turns welding head to set specified angle of electrode.
May fill hopper with specified flux and direct nozzle or gravity feed over weld line, or adjust shielding gas or gas mixture flow rate.
Turns knobs to set current, voltage, and slope, and synchronize feed of wire and flux with speed of welding action.
May set limit switch which automatically stops machine at end of weld.
Starts machine and observes meters and gauges, or observes welding action for compliance with procedures.
Visually examines welds for adherence to specifications.
May grind welded surfaces for penetrant test.
Adjusts machine setup to vary size, location, and penetration of bead.
May install track template to weld irregularly shaped seams.
May make trial run before welding and record setup and operating data.
May layout, fit, and tack workpieces together.
May preheat workpiece, using hand torch or heating furnace.
Estimated salary in 2024:
5 Year Change:
Education data not available for this job
Skills data not available for this job
Welding Machine Operator Gas Metal Arc Job Listings for Connecticut, United States
Aerospace Gas Tungsten Arc Welder
Hartford, CT, USA
Aircraft Welding & Mfg. Co. LLC
Under limited supervision, weldmetals & fabricate thin Steel, Stainless Steel, Nickel Alloy ... Be able to set up the weldingmachine for specific materials, thicknesses, and positions. * Will be ...
METALS USA; Gregor Technologies Division is seeking a CNC Turning MachineOperator for our Torrington, CT location. The CNC Turning MachineOperator produces machined parts by programming, setting up ...
Injection Mold Machine Operator (1st and 2nd Shift)
Ansonia, CT, USA
... Mold MachineOperators on 2nd and 3rd Shift. Perform secondary type of operations and provide ... Responsible to safely operate pad printing, sonic welding and other secondary equipment. Understand ...